Recording

Amplify Teacher Audio while Recording with the Teams by Swivl App

If you need to amplify your teacher's audio while recording with Teams by the Swivl app, you can do so using either one of Swivl's amplified audio setups. 

AC Speakers

Integrated Setup

 

AC Speakers

 Equipment:

 swivl_robot.png +        Logitech Z200 Speakers       +       

Find more information about recommended equipment here

 

This setup works if you would like to record video using your Teams by Swivl app and simultaneously amplify the Primary Marker:

1. Connect the speakers to the Robot. The speakers' audio cord has to be plugged into the Robot's USB port. So, if the speakers have a 3.5 mm audio cord, please use the appropriate adapter.

Speakers__adapter.png

2. Connect your mobile device to the robot and open the Teams app. Turn on the Robot and the Primary Marker.

Robot_connected.jpg

3. Tap on the Record section to proceed to the camera view and start recording.

record_-_iPad.jpg

Tip:  When the speakers connected correctly, a teacher can hear herself/himself speaking amplified before start recording. Also, ensure that the Base port is configured to speakers. You can change it any time you need it in Settings=> Base port configuration. 

 

Integrated Setup

If you need to amplify the presenter’s voice in a large room while recording with the Teams app and have no AC speakers, or for any other reasons want to use an interactive display/PC/Windows Laptop, follow the steps below. 

swivl_robot.png

Swivl Robot

13-inch-mbpro-header.jpg

pc.jpg

Laptop or Desktop Computer

USB_2.0_AM-AM_.png

20ft USB A to USB A Cable 

or 

Swivl Link

swivl_link.jpeg

promethean.jpg189-1890267_projector-buy-singapore-hd-png-download.png

A Projector, Interactive Display (such as a SMART Board), Promethean Board, or other speaker systems in the classroom

 

WARNING: do not attempt to connect any cables between the robot base and your speaker system prior to confirming the latest firmware update on the Swivl Base. Failure to complete this may result in irreversible damage to either your device and/or the Swivl Base.

 

1. Connect your mobile device to the Robot as usual.

CX_connected_via_cord.jpg

2. Make sure the firmware version is up to date: see Product updates.

If it's lower than 10.04.08 update the firmware to the latest version. Reference the instructions here.

3. In Settings, select the Base port configuration To computer/To Link, depending on what accessory you are going to use.

To_computer_-_iPad.jpg

4.Next, connect a USB-A to USB-A cable or Swivl Link to the PC/Interactive Display/Laptop/Chromebook's USB port. Recommended cable length is up to 20ft.

USB_2.0_cable.png or swivl_link.jpeg

See all the cable-related details in our article Recommendations for Add-on Accessories and Hardware.

5. On your computer/laptop, please open audio settings and select Swivl Audio Interface for audio input.

6. To output Swivl Marker(s) through the computer's speakers:

 

- for Windows:

 

 In Digital Audio Interface Properties, open the Listen tab and checkmark Listen to this device

listen_to_the_device.jpg

 

- for Mac:

 

Due to the MacBook limitations, there is no possibility to output the audio directly.

That is why it is necessary to open a third-party audio app (for instance QuickTime player) and select Swivl Audio

arrow_-_QT.jpg.jpg Swivl_Link_Audio_-_QT.jpg

 

Please note, you do not need the QuickTime to record the audio. This step merely allows you to output Swivl audio through the MacBook speakers.

 

 After the successful setup, you can hear audio from all Swivl Markers from the USB-connected Interactive Display/PC/Laptop/Chromebook

In this case, Swivl works as an external microphone for Interactive Display/Laptop/PC/Chromebook and transmits Swivl Markers connected.

 

(If the Computer does not recognize Swivl as a microphone option, follow these instructions

Updated

Was this article helpful?

2 out of 3 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.