The following recommendations are for both C-Series and CX Robots
1. Line of sight
The Swivl base will follow the movement of the marker using an infrared signal. For best results, the marker must maintain a relatively direct line of sight with the Swivl base with no physical obstacles, e.g. furniture, monitors, students' heads or teacher turning her back on the base. We recommend that you practice moving around a room using the infrared signal. You may notice that the infrared signal may even reflect off of smooth, shiny surfaces or become blocked by a loose sweater or tie.
2. Marker positioning
We recommend using a lanyard and/or clip and wearing a marker high to ensure great audio and best tracking results
3. Base height
Whenever possible, mount your robot on one of our floor stands or your own tripod to ensure the presenter can be captured in full view.
The marker will function at a range of 3-30 feet from the base, but a distance of 5-20 feet is preferred.
Toggle Auto-Exposure on and off in the Teams app Settings depending on the lighting of your capture environment. Bright lights from projectors are not recording-friendly unfortunately so if you want to record a presentation, try Recording your screen with Swivl+ Desktop instead of trying to record your smartboard.
Settings => Advanced => Exposure (iOS only)
- test different shims to see which shim holds your mobile device tightly and ensure the best tilt.
- enable Auto-Tilt. It is helpful when you want to pan up and down, but if you find your lighting conditions or environment adversely affects tilt, turn it off in your Settings menu. Try Tilt Correction instead: our experimental face-detection feature can help keep you in the frame, but keep the marker close to your chest, either with a lanyard or lanyard clip.
Click to continue to the next article Changing shims